-
Stone Fabrication Tools
-
Board
-
Zigzag Grooving Blades / For Heating Lines
- Xpress Dry Concrete Blades
- Xpress Shark Blades
- Dry Concrete Blades
- All-Round Anycon Blades
- Dry Asphalt-Green Concrete Blades
- LT Blades (Laser Turbo Segmented Blades)
- Brick Blades
- HB Blades (Very Hard Brick & Pavers Blades)
- Refractory Blades
- Joint Cleaning Blades
- Universal Blades
- Laser Tuck Point Blades
- Tuck Point Blades with TCT Protection
- Zigzag Grooving Blades / For Heating Lines
- Crack Chasers
- Zigzag Crack Chasers
- U Groove Crack Chasers
Zigzag Grooving Blades / For Heating Lines
Laser welded / Dry or wet / Zigzag segments / For wide groove cutting
 (RED).webp)
 (Orange).webp)
Professional Zigzag Grooving Blades for Wide Groove Cutting
Wide groove cutting requires a blade designed to remove more material while maintaining a controlled groove profile.
DIATOP Zigzag Grooving Blades are designed to cut or groove widths up to 17 mm using a zigzag segment configuration.
The blade uses four kicker segments on both sides to create a sloped groove profile.
Two 5 inch specifications are available, with 7 x 2 mm and 17 mm segment thickness configurations.
Key Features
-
Designed to cut or groove widths up to 17 mm with zigzag segments.
-
Four kicker segments on both sides for slope grooving.
-
Laser welded.
-
Dry or wet cutting.
Available Sizes
Item – Diameter inch / Diameter mm / Segment Thickness mm
-
SWT125-14 – 5 inch / 125 mm / 7 x 2 mm
-
SWT125-17 – 5 inch / 125 mm / 17 mm
Technical Notes
-
Diameter: 125 mm
-
Zigzag segment configuration
-
Four kicker segments on both sides
-
Designed for slope grooving
-
Dry or wet use
Typical Applications
zigzag grooving, wide groove cutting, wide groove grinding, slope grooving, concrete grooving, masonry grooving, joint widening, 17 mm groove cutting, dry grooving, wet grooving
Q1. What diamond blade is recommended for cutting a wide groove up to 17 mm?
A. DIATOP Zigzag Grooving Blades are designed to cut or groove widths up to 17 mm using zigzag segments. The SWT125-17 is specified with a 17 mm segment thickness.
Q2. Can Zigzag Grooving Blades be used for both dry and wet cutting?
A. Yes. DIATOP Zigzag Grooving Blades are laser welded and designed for both dry and wet cutting applications.
Q3. What is the purpose of the kicker segments on Zigzag Grooving Blades?
A. The catalog specifies four kicker segments on both sides of the blade for slope grooving.
For grooving blade selection guidelines, groove width selection, dry and wet operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.
