VOLCANO XPRESS V Blades

Silent blade for quartzite and granite / Silver brazed / Wet

Bridge Saw Blades for Quartzite and Granite Fabrication

Quartzite and granite are among the most challenging materials used in modern stone fabrication. Their hardness, density, and abrasive mineral composition place significant demands on bridge saw blades, requiring stable cutting performance and precise edge quality.

VOLCANO XPRESS V Blades are engineered for professional fabrication facilities processing quartzite, granite, and engineered stone materials. Patterned diamond technology, V-groove segment design, and optimized side clearance help improve cutting efficiency while maintaining clean edges and straight cuts throughout slab processing.

Typical applications include countertop fabrication, slab production, architectural stone processing, monument manufacturing, and custom stone projects.

Type of Equipment: BS (Bridge Saw)

Key Features

• Lower cost per cut with a clean edge finish.
• Excellent cutting performance for quartzite such as Taj Mahal.
• Patterned diamonds deliver faster cutting and longer blade life.
• Improved cutting speed with V-groove and large notch design.
• Precise side clearance for straight cutting.
• Long service life with 25 mm segment height.
• Strict welding inspection for safe operation.

Available Sizes

Item – D x T inch / D x T mm / Segment Height inch / Segment Height mm

• NSXV 353225 – 14 x .125 inch / 350 x 3.2 mm / 1 inch / 25 mm
• NSXV 403225 – 16 x .125 inch / 400 x 3.2 mm / 1 inch / 25 mm
• NSXV 453625 – 18 x .141 inch / 450 x 3.6 mm / 1 inch / 25 mm
• NSXV 503625 – 20 x .141 inch / 500 x 3.6 mm / 1 inch / 25 mm

* Bore hole diameter: 60/50 mm

* Donatoni & Breton hole available

Operation Parameters

Diameter (Inch / mm) / Recommended RPM / Feed rate/min (Feet / M)

• 14 / 350 / 1500–1700 / 10–17 / 3–5
• 16 / 400 / 1400–1550 / 10–17 / 3–5
• 18 / 450 / 1200–1400 / 10–17 / 3–5
• 20 / 500 / 1100–1250 / 10–17 / 3–5

Typical Applications

quartzite slab cutting, granite slab cutting, engineered stone processing, bridge saw cutting, countertop fabrication, stone fabrication, slab cutting, architectural stone fabrication, monument production, stone workshop manufacturing

Q1. What bridge saw blade is recommended for cutting quartzite and granite?

A. VOLCANO XPRESS V Blades are designed for professional bridge saw cutting of quartzite, granite, and engineered stone materials. They combine patterned diamond technology, a V-groove segment design, and precise side clearance to support efficient cutting, clean edges, and straight cuts.

Q2. Can VOLCANO XPRESS V Blades cut quartzite such as Taj Mahal?

A. Yes. VOLCANO XPRESS V Blades are designed for quartzite and granite fabrication and provide excellent cutting performance for quartzite such as Taj Mahal. They are also suitable for engineered stone processing.

Q3. What are the benefits of the V-groove segment design on VOLCANO XPRESS V Blades?

A. The V-groove and large notch design helps improve cutting speed, while precise side clearance supports straight cutting. Patterned diamonds also contribute to faster cutting and longer blade life, and the 25 mm segment height is designed for long service life.

For recommended RPM settings, feed rates, operating parameters, and troubleshooting guidance, please visit the DIATOP Tech Notes section.