Refractory Blades

Dry / Laser welded / For hard refractory bricks

Professional Dry Diamond Blades for Refractory Brick Cutting

Refractory cutting requires a blade capable of maintaining fast cutting performance in dense, heat-resistant brick and cast refractory materials.

DIATOP REFRACTORY BLADES are designed for fast dry cutting of hard refractory bricks.

The blades are engineered to provide a low cost per cut and are available with multiple bond specifications according to refractory hardness and material type.

Premium and Supreme quality grades are available, with silent refractory blade versions also available.

Type of Equipment: M / M (Tile Saws / Masonry Saws)

Key Features

• Designed for fast cutting of hard refractory bricks.

• Designed for the lowest possible cost per cut.

• Dry cutting.

• Laser welded.

• Silent refractory blades available.

Available Sizes

Item – D x T inch / D x T mm / Segment Height mm

• DRFM3532 – 14 x .125 inch / 350 x 3.2 mm / 7, 8 mm

• DRFM4032 – 16 x .125 inch / 400 x 3.2 mm / 7, 8 mm

• DRFM4532 – 18 x .125 inch / 450 x 3.2 mm / 7, 8 mm

• DRFM4536 – 18 x .141 inch / 450 x 3.6 mm / 7, 8 mm

• DRFM5036 – 20 x .141 inch / 500 x 3.6 mm / 7, 8 mm

* Available arbor: 20 mm, 25.4 mm, 30 mm and 50 mm

* Silent refractory blades available.

Quality Grade

• DRFHP – Premium

• DRFHS – Supreme

Bond Selection

Aggregate Type / Bond

• Very hard, fused cast refractories – DRFS

• Hard, high alumina – DRFM

• Medium hard refractories – DRFH

Typical Applications

refractory brick cutting, hard refractory cutting, fused cast refractory cutting, high alumina refractory cutting, medium hard refractory cutting, dry refractory cutting, masonry saw cutting, tile saw cutting, industrial refractory cutting

Q1. What diamond blade is recommended for hard refractory brick cutting?

A. DIATOP REFRACTORY BLADES are designed for fast dry cutting of hard refractory bricks and are intended to provide a low cost per cut.

Q2. What refractory materials can DIATOP REFRACTORY BLADES cut?

A. Bond options are available for very hard fused cast refractories, hard high-alumina materials, and medium-hard refractory materials.

Q3. What quality grades and arbor options are available for REFRACTORY BLADES?

A. Premium and Supreme quality grades are available. Arbor options include 20 mm, 25.4 mm, 30 mm, and 50 mm, and silent refractory blade versions are also available.

For refractory blade selection guidelines, bond selection, arbor configuration, dry-cutting operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.