Dry Ceramic Polishing Pads

Dry / For ceramic tile and porcelain tile / Full grit sequence

Professional Dry Polishing Pad for Ceramic and Porcelain Tile

Ceramic and porcelain tile polishing requires a pad capable of maintaining consistent dry finishing performance across multiple polishing stages.

DIATOP Dry Ceramic Polishing Pad is designed specifically for dry polishing of ceramic tile and porcelain tile.

The pad is available in a full grit sequence from #50 to #3000.

Type of Equipment: AP (Air Polisher)

Key Features

• Suitable for ceramic tile.

• Suitable for porcelain tile.

• Designed for dry polishing.

• Full grit sequence from #50 to #3000.

• 4 inch / 100 mm diameter.

Available Sizes

Item – Diameter inch / Diameter mm / Grit

• DPC4-50 – 4 inch / 100 mm / #50

• DPC4-100 – 4 inch / 100 mm / #100

• DPC4-200 – 4 inch / 100 mm / #200

• DPC4-400 – 4 inch / 100 mm / #400

• DPC4-800 – 4 inch / 100 mm / #800

• DPC4-1500 – 4 inch / 100 mm / #1500

• DPC4-3000 – 4 inch / 100 mm / #3000

Technical Notes

• Pad Type: Dry Ceramic Polishing Pad

• Diameter: 4 inch / 100 mm

• Dry use

• Grit Range: #50, #100, #200, #400, #800, #1500, #3000

• Suitable Materials: Ceramic tile, porcelain tile

Typical Applications

ceramic tile polishing, porcelain tile polishing, dry ceramic polishing, dry porcelain polishing, tile edge polishing, surface finishing, progressive polishing, tile fabrication

Q1. What materials are suitable for the Dry Ceramic Polishing Pad?

A. The catalog specifies ceramic tile and porcelain tile.

Q2. Is water required when using this pad?

A. No. The pad is specified for dry polishing.

Q3. What grit sequence is available?

A. The available grit sequence is #50, #100, #200, #400, #800, #1500, and #3000.

For Dry Ceramic Polishing Pad selection, grit sequence, dry polishing conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.