Turbo Polishing Pads

Wet / For flat surfaces and corners / 3 inch and 4 inch sizes / Full grit sequence

Professional Wet Turbo Polishing Pad for Flat Stone Surfaces and Corners

Flat stone surfaces and corner areas require a polishing pad capable of maintaining an even finish without creating visible waves.

DIATOP Turbo Polishing Pad is designed for wet polishing of flat surfaces and corner areas.

The pad is available in both 3 inch and 4 inch diameters, with a progressive grit sequence from #50 to #3000 and a Buff Black pad for final finishing.

Type of Equipment: AP / HG (Air Polisher / Handheld Grinder)

Key Features

• Designed for flat surfaces.

• Suitable for polishing corner areas.

• Designed to polish without waves.

• Wet polishing.

• Available in 3 inch and 4 inch diameters.

• Full grit sequence from #50 to #3000.

• Buff Black available for final polishing.

Available Sizes – 3 Inch

Item – Diameter inch / Diameter mm / Grit

• TPD 3-050 – 3 inch / 75 mm / #50

• TPD 3-100 – 3 inch / 75 mm / #100

• TPD 3-200 – 3 inch / 75 mm / #200

• TPD 3-400 – 3 inch / 75 mm / #400

• TPD 3-800 – 3 inch / 75 mm / #800

• TPD 3-1500 – 3 inch / 75 mm / #1500

• TPD 3-3000 – 3 inch / 75 mm / #3000

• TPD 3BB – 3 inch / 75 mm / Buff Black

Available Sizes – 4 Inch

Item – Diameter inch / Diameter mm / Grit

• TPD 4-050 – 4 inch / 100 mm / #50

• TPD 4-100 – 4 inch / 100 mm / #100

• TPD 4-200 – 4 inch / 100 mm / #200

• TPD 4-400 – 4 inch / 100 mm / #400

• TPD 4-800 – 4 inch / 100 mm / #800

• TPD 4-1500 – 4 inch / 100 mm / #1500

• TPD 4-3000 – 4 inch / 100 mm / #3000

• TPD 4BB – 4 inch / 100 mm / Buff Black

Technical Notes

• Pad Type: Turbo Polishing Pad

• Wet use

• Diameter Options: 3 inch / 75 mm, 4 inch / 100 mm

• Grit Range: #50, #100, #200, #400, #800, #1500, #3000

• Final Buff Option: Buff Black

• Designed for flat surfaces and corner polishing

• Designed to minimize waves during polishing

Typical Applications

flat surface polishing, corner polishing, wet stone polishing, countertop polishing, edge polishing, progressive polishing, final buffing, stone fabrication

Q1. What is the Turbo Polishing Pad designed for?

A. DIATOP Turbo Polishing Pad is designed for wet polishing of flat surfaces and corner areas while helping prevent waves in the finished surface.

Q2. What sizes are available?

A. The catalog lists 3 inch (75 mm) and 4 inch (100 mm) diameters.

Q3. What grit sequence and final buff option are available?

A. The available grit sequence is #50, #100, #200, #400, #800, #1500, and #3000, with Buff Black available for the final polishing stage.

For Turbo Polishing Pad selection, grit sequence, wet polishing conditions, corner polishing, and troubleshooting guidance, please visit the DIATOP Tech Notes section.