Incremental Cutting Finger Tips for Granite

Wet / For radial arm machines / Fast cutting and long-life options

Professional Incremental Cutting Finger Tips for Granite Sink Cutouts

Granite sink cutouts on radial arm machines require incremental finger tips capable of controlled cutting while maintaining stable performance during stone fabrication.

DIATOP Incremental Cutting Finger Tips for Granite are designed for wet cutting of sink cutouts with radial arm machines.

The range is suitable for Thibaut, Park, Wizard, Scorpion, and other radial arm machines.

Fast-cutting and long-life specifications are available depending on the required application.

Type of Equipment: RA (Radial Arm Polisher)

Key Features

• Incremental finger bit for granite sink cutouts.

• Designed for radial arm machines.

• Suitable for Thibaut machines.

• Suitable for Park machines.

• Suitable for Wizard machines.

• Suitable for Scorpion machines.

• Fast-cutting options available.

• Long-life options available.

• Wet cutting.

Available Sizes

Item – Diameter inch / Diameter mm / Height mm / Ref.

• ICFG 1620F – 5/8 inch / 16 mm / 20 mm / Fast cutting

• ICFG 2015F – 3/4 inch / 20 mm / 15 mm / Fast cutting

• ICFG 2020F – 3/4 inch / 20 mm / 20 mm / Fast cutting

• ICFG 2015L – 3/4 inch / 20 mm / 15 mm / Long life

• ICFG 2020L – 3/4 inch / 20 mm / 20 mm / Long life

• ICFG 3020F – 1 1/8 inch / 30 mm / 20 mm / Fast cutting

* M12 thread and 1/2 gas thread available.

Operation Parameters

• RPM: 4500

• Feed: 400–1000 mm/min

Technical Notes

• Tool Type: Incremental cutting finger tip

• Wet cutting

• Machine Type: Radial arm machine

• Thread Options: M12, 1/2 gas

• Performance Options: Fast cutting / Long life

• Recommended RPM: 4500

• Recommended Feed: 400–1000 mm/min

Typical Applications

granite sink cutout, granite countertop sink cutout, incremental cutting, radial arm stone cutting, Thibaut granite cutting, Park radial arm cutting, Wizard radial arm cutting, Scorpion radial arm cutting, countertop fabrication, granite fabrication, wet stone cutting

Q1. What incremental finger tip is recommended for granite sink cutouts on radial arm machines?

A. DIATOP Incremental Cutting Finger Tips for Granite are designed for wet sink cutout applications using radial arm machines.

Q2. What radial arm machines are compatible with these finger tips?

A. The catalog specifically lists Thibaut, Park, Wizard, and Scorpion, as well as other radial arm machines.

Q3. What operating parameters are recommended?

A. The catalog specifies 4500 RPM with a feed rate of 400–1000 mm/min. Fast-cutting and long-life versions are available depending on the item.

For incremental finger tip selection guidelines, machine compatibility, thread selection, operating parameters, and troubleshooting guidance, please visit the DIATOP Tech Notes section.