Porcelain Blades

Dry & Wet / For extra-hard porcelain, very hard ceramic tiles, and Dekton

Professional Porcelain Blades for Extra-Hard Ceramic and Dekton Cutting

Extra-hard porcelain and very hard ceramic materials require a blade capable of maintaining smooth cutting performance and long service life.

DIATOP Porcelain Blades are specially designed for extra-hard porcelain, very hard ceramic tiles, and Dekton.

The blades are suitable for both dry and wet cutting and are available in a wide diameter range for different fabrication requirements.

Depending on blade size, segment thickness and height vary from 1.6 mm x 7 mm up to 3.2 mm x 10 mm.

Type of Equipment: AG (Angle Grinder)

Key Features

• Specially made for extra-hard porcelain.

• Suitable for very hard ceramic tiles.

• Suitable for Dekton.

• Smooth cutting.

• Long life.

• Dry & Wet cutting.

Available Sizes

Item – D x T x H inch / D x T x H mm

• POR 100 – 4 x .063 x .275 inch / 100 x 1.6 x 7 mm

• POR 115 – 4 1/2 x .063 x .275 inch / 115 x 1.6 x 7 mm

• POR 125 – 5 x .063 x .275 inch / 125 x 1.6 x 7 mm

• POR 150 – 6 x .063 x .275 inch / 150 x 1.6 x 7 mm

• POR 180 – 7 x .063 x .275 inch / 180 x 1.6 x 7 mm

• POR 200 – 8 x .063 x .275 inch / 200 x 1.6 x 7 mm

• POR 230 – 9 x .063 x .275 inch / 230 x 1.6 x 7 mm

• POR 250 – 10 x .063 x .275 inch / 250 x 1.6 x 7 mm

• POR 300 – 12 x .078 x .315 inch / 300 x 2.0 x 8 mm

• POR 350 – 14 x .102 x .315 inch / 350 x 2.6 x 8 mm

• POR 400 – 16 x .125 x .394 inch / 400 x 3.2 x 10 mm

Technical Notes

• Bore hole for 4"–10": 7/8" (22.23 mm)

• Bore hole for 12"–16": 2" (60/50 mm)

• Diamond thickness and height can be changed without notice.

• Dry & Wet cutting.

• Suitable materials: Extra-hard porcelain, very hard ceramic tiles, Dekton.

Typical Applications

porcelain cutting, porcelain tile cutting, extra-hard porcelain cutting, ceramic tile cutting, very hard ceramic cutting, Dekton cutting, dry porcelain cutting, wet porcelain cutting, angle grinder cutting, large-format tile cutting, ceramic fabrication

Q1. What diamond blade is recommended for extra-hard porcelain and very hard ceramic tiles?

A. DIATOP Porcelain Blades are specially designed for extra-hard porcelain and very hard ceramic tiles and are also suitable for Dekton.

Q2. Can DIATOP Porcelain Blades be used for both dry and wet cutting?

A. Yes. DIATOP Porcelain Blades are designed for both dry and wet cutting and are specified for smooth cutting and long life.

Q3. What bore sizes are available for DIATOP Porcelain Blades?

A. The catalog specifies a 7/8" (22.23 mm) bore for 4"–10" blades and a 2" (60/50 mm) bore for 12"–16" blades.

For porcelain blade selection guidelines, bore compatibility, dry and wet cutting conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.