SUPER Turbo

Dry / For very hard granite and quartzite / Sharp patterned segment / Silent reinforced center

Professional Dry Turbo Blade for Very Hard Granite and Quartzite

Very hard granite and quartzite require a dry cutting blade capable of maintaining sharp cutting performance while controlling heat and vibration during operation.

DIATOP SUPER Turbo is designed for dry cutting of very hard granite and quartzite.

The blade features a sharp patterned segment design for cutting performance, fast-cooling air holes, and a silent reinforced center.

Available diameters range from 5 inches to 14 inches, with blade thicknesses from 2.1 mm to 3.3 mm depending on size.

Type of Equipment: P / M / AG (Power Hand Saw / Tile Saw / Angle Grinder)

Key Features

• Designed for very hard granite and quartzite.

• Sharp patterned segment.

• Fast-cooling air holes.

• Silent reinforced center.

• Dry cutting.

• Turbo blade design.

Available Sizes

Item – D x T inch / D x T mm

• STA 125 – 5 x .083 inch / 125 x 2.1 mm

• STA 150 – 6 x .087 inch / 150 x 2.2 mm

• STA 180 – 7 x .102 inch / 180 x 2.6 mm

• STA 230 – 9 x .102 inch / 230 x 2.6 mm

• STA 350 – 14 x .130 inch / 350 x 3.3 mm

* Arbor: 22.23 mm (7/8")

Technical Notes

• Blade Type: Turbo

• Segment Type: Sharp patterned segment

• Cooling: Air holes

• Center Type: Silent reinforced center

• Arbor: 22.23 mm (7/8")

• Dry cutting

• Suitable materials: Very hard granite, quartzite

Typical Applications

very hard granite cutting, quartzite cutting, dry granite cutting, dry quartzite cutting, patterned segment cutting, turbo blade cutting, power hand saw cutting, tile saw cutting, angle grinder cutting, stone fabrication, granite fabrication, quartzite fabrication

Q1. What dry turbo blade is recommended for very hard granite and quartzite?

A. DIATOP SUPER Turbo is designed for dry cutting of very hard granite and quartzite. It features a sharp patterned segment design and a silent reinforced center.

Q2. How does SUPER Turbo support cooling during dry cutting?

A. The blade uses fast-cooling air holes to help dissipate heat during dry cutting.

Q3. What sizes are available for SUPER Turbo?

A. SUPER Turbo is available in 5, 6, 7, 9, and 14 inch diameters, with blade thicknesses from 2.1 mm to 3.3 mm depending on size.

For turbo blade selection guidelines, arbor compatibility, dry-cutting operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.