XPRESS ASPHALT Premium Blades

Wet / Patterned diamond segments / Laser welded / Low HP floor saws of 20 HP or less

Professional Wet Asphalt Blades for Low-Horsepower Floor Saws

Asphalt cutting on lower-horsepower floor saws requires a blade that can maintain cutting speed, segment stability, and durability while working through abrasive pavement materials.

XPRESS ASPHALT Premium Blades are designed for low-horsepower floor saws of 20 HP or less and are manufactured using patterned diamond technology.

Compared with traditional random mixed diamonds, the patterned diamond design provides faster cutting speed and longer blade life. A sandwich segment structure promotes even wear, while a very hard bond with a very high volume of WC (Tungsten carbide) supports durability in asphalt cutting applications.

The segments are laser welded on both sides to help prevent segment loss, and welding strength is inspected on both sides using DIATOP’s special torque tester for safety.

Type of Equipment: FL (Flat Saw – 13 HP or less)

Key Features

• DIATOP XPRESS ASPHALT Premium Blades are manufactured using patterned diamond technology.
• Faster cutting speed and longer blade life compared with traditional random mixed diamonds.
• Sandwich segment design promotes even wear of the diamond segments.
• Very hard bond with a very high volume of WC (Tungsten carbide) for high durability.
• Laser welded on both sides to help prevent segment loss.
• Welding strength of the laser-welded segments is inspected on both sides using DIATOP’s special torque tester for safety.

Available Sizes

Item – D x T inch / D x T mm / Segment Height inch / Segment Height mm

• WAXFP 353210 – 14 x .125 inch / 350 x 3.2 mm / .394 inch / 10 mm
• WAXFP 403210 – 16 x .125 inch / 400 x 3.2 mm / .394 inch / 10 mm
• WAXFP 403610 – 16 x .141 inch / 400 x 3.6 mm / .394 inch / 10 mm
• WAXFP 453210 – 18 x .125 inch / 450 x 3.2 mm / .394 inch / 10 mm
• WAXFP 453610 – 18 x .141 inch / 450 x 3.6 mm / .394 inch / 10 mm
• WAXFP 504010 – 20 x .155 inch / 500 x 4.0 mm / .394 inch / 10 mm
• WAXFP 604210 – 24 x .165 inch / 600 x 4.2 mm / .394 inch / 10 mm

* Standard arbor is 25.4 mm with pin hole. Other arbor hole is as requested.

Bond Selection

Aggregate Hardness / Bond

• Very hard – VS
• Medium Hard – MS
• Medium – MM
• Medium Soft – MH
• Soft – VH

Typical Applications

asphalt cutting, wet asphalt cutting, asphalt pavement cutting, roadway asphalt cutting, highway asphalt cutting, low-horsepower floor saw cutting, pavement cutting, road construction cutting, asphalt surface cutting, patterned diamond asphalt blade cutting

Q1. What diamond blade is recommended for asphalt cutting with low-horsepower floor saws?

A. The XPRESS ASPHALT Premium Blade is designed for low-horsepower floor saws of 20 HP or less. It uses patterned diamond technology to provide faster cutting speed and longer blade life compared with traditional random mixed diamonds.

Q2. Can the XPRESS ASPHALT Premium Blade be selected for different aggregate hardness levels?

A. Yes. The XPRESS ASPHALT Premium Blade is available with bond options for Very hard, Medium Hard, Medium, Medium Soft, and Soft aggregate conditions, with the corresponding bond codes VS, MS, MM, MH, and VH.

Q3. What features help improve durability and segment retention on the XPRESS ASPHALT Premium Blade?

A. The blade uses a sandwich segment design for even segment wear and a very hard bond containing a very high volume of WC (Tungsten carbide) for high durability. The segments are laser welded on both sides, and welding strength is inspected on both sides using DIATOP’s special torque tester for safety.

For blade selection guidelines, bond selection, recommended operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.